Code: Select all
cd ~/Downloads
chmod +x SheetCam_setupV7.1.16-32.bin
./SheetCam_setupV7.1.16-32.bin
Code: Select all
cd ~/Downloads
chmod +x SheetCam_setupV7.1.16-32.bin
./SheetCam_setupV7.1.16-32.bin
Using XFCE. I could create the shortcut on the desktop but it did not have the sheetcam icon. What file is that included in?Les Newell wrote: ↑Mon Oct 11, 2021 12:18 pm What desktop are you using? In most cases you can simply drag the SheetCam shortcut onto your desktop.
That was the thing. Nothing turned up in the menu anywhere I could see.Les Newell wrote: ↑Mon Oct 11, 2021 9:08 pm If you drop down the start menu and select graphics you should be able to drag the SheetCam shortcut onto your desktop.
Alternatively you can find the SheetCam icon in ~/sheetcamtng/resources/sheetcamlogo.png
Code: Select all
post.NonModalNumber(",kw=", toolDia * scale, precision)
Code: Select all
holeMode = 0
Code: Select all
holeMode = 2 -- Set the hole cutting mode. 0=disabled, 1=diameter velocity reduction,
-- 2= vel reduction+ overcut, 3=include arcs, 4=arcs + overcut
holeVelocity = 60 -- Set the velocity for hole cutting mode as a percentage of feedrate
holeDia = 32 -- Set the hole diameter in device units (mm)
holeOvercut = 4 -- Set the whole overcut distance (mm)
Code: Select all
holeMode = 0
Code: Select all
;begin statistics
;Pierces = 4
; Cuts = 4, Length = 627.48mm
;end statistics