running sheetcam on 2 pc's

jacala · Post by **jacala** » Mon Sep 08, 2014 7:35 am

Hello!

I've bought sheetcam about a year ago and today I bought V-Carve.

Were gonna use is to cut signs etc but I've got a question:

Can I install sheetcam on 2 pc's? So that my colleague can make his own G code in stead of using my laptop?

Post by **Les Newell** » Mon Sep 08, 2014 7:37 am

I'm afraid not. The license is only for one PC.

jacala · Post by **jacala** » Mon Sep 08, 2014 1:36 pm

Hello Les!

That's a shame but understandable.

Is it possible to make the jobfile on a unlicensed version and do the export to G code on my payed version?

The V carve plugin does work great in real life btw.

Post by **Les Newell** » Mon Sep 08, 2014 1:41 pm

yes, I should have mentioned that. You can create the job file with an unlicensed version. The only limitation is that simulation is limited to roughly the same number of lines as the post processor. If you don't need simulation it should work fine.