Evaluation Limit Reached
Evaluation Limit Reached
Thanks in advance,
I have two questions, the last (I believe) is simply a corollary of the first; first, when I run an evaluation on a single part, I get a message in red that reads: Evaluation limit reached. Below that another: Post processing failed. I was happy to see it said processing - not processor failed.
The second question, in my view is related to the evaluation failure. The cross hairs, track around the cut path (all green w/red directional arrows) then stops approximately three quarters of the way. Perhaps the part overloads the evaluation function.
The part is a 60” by 4” grate with nine 1/16” by 2” slots and a plethora of ¼” faceted poly-line risers. The risers grates set in the water container. Typical water table grill.
Anyway, what’s wrong?
Jim
I have two questions, the last (I believe) is simply a corollary of the first; first, when I run an evaluation on a single part, I get a message in red that reads: Evaluation limit reached. Below that another: Post processing failed. I was happy to see it said processing - not processor failed.
The second question, in my view is related to the evaluation failure. The cross hairs, track around the cut path (all green w/red directional arrows) then stops approximately three quarters of the way. Perhaps the part overloads the evaluation function.
The part is a 60” by 4” grate with nine 1/16” by 2” slots and a plethora of ¼” faceted poly-line risers. The risers grates set in the water container. Typical water table grill.
Anyway, what’s wrong?
Jim
- Les Newell
- Site Admin
- Posts: 3684
- Joined: Thu May 11, 2006 8:12 pm
Eval limit
Hi and thanks Les,
I purchased a license through CandCNC = its License.camlic. So apparently I was on the right track. If that's correct, then I should be able to duplicate and cut if nothing else is haywire.
What would be involved in extending the eval to cover larger more complex parts? Perhaps you would reach a point of diminishing returns, so I can see probably why not!
My email is jims5green@aol.com just in case.
Best regards,
Jim
I purchased a license through CandCNC = its License.camlic. So apparently I was on the right track. If that's correct, then I should be able to duplicate and cut if nothing else is haywire.
What would be involved in extending the eval to cover larger more complex parts? Perhaps you would reach a point of diminishing returns, so I can see probably why not!
My email is jims5green@aol.com just in case.
Best regards,
Jim
Evaluation limit reached
Hi there I am having the same problem with the evaluation limit reached just wondering if you could help me ? Dom-1991@hotmail.co.uk cheers
Re: Evaluation Limit Reached
Les Hi I too am running into the eval limit and honestly before I buy a license i want to see at least how well the software works. Or should I say how well I work with the software. Is it possible for you to send me the 30 trial also? and will i need to reinstall sheetcam to use it?
- Les Newell
- Site Admin
- Posts: 3684
- Joined: Thu May 11, 2006 8:12 pm
Re: Evaluation Limit Reached
I emailed you an evaluation license.
Re: Evaluation Limit Reached
Good morning Admin staff, I managed to load a couple of programs onto sheetcam and the post processor worked, but when I tried to load a larger file, it gave me an evaluation limit error in red. We purchased our table with controller brand new through a company in Hereford UK with sheetcam already loaded onto the controller. Is there anyway you can help me?
-
- Posts: 7
- Joined: Thu Nov 09, 2023 9:58 am
Re: Evaluation Limit Reached
there are a few small outfits in the uk selling plasma tables with unlicenced copies of sheetcam....I know as I bought one, however sheetcam is cheap and best solution is do what I did and give him a call and buy the license, problem solved! in the world of CAM software you won't get anything cheaper thats for sure!
- Les Newell
- Site Admin
- Posts: 3684
- Joined: Thu May 11, 2006 8:12 pm
Re: Evaluation Limit Reached
I just had a look though my records and can't find a license under your email. However if your license was supplied by a reseller they may not have put your email on the license. I think the first thing to do is to contact the supplier of the machine to clarify if they were supposed to supply a license. I'll send you a temporary license to get you up and runnign quickly.
Re: Evaluation Limit Reached
Keep running in to evaluation limit we bought it second hand apparently it didn't come with a license is there any way to get 30 daytrial to show my partner how much we can actually do
- Les Newell
- Site Admin
- Posts: 3684
- Joined: Thu May 11, 2006 8:12 pm
Re: Evaluation Limit Reached
I have sent you an email.