With advice from a MASSO controller user, I've attempted to add rotary support to the std MASSO Plasma DTHC scpost.
attached are a job file so you can see my test case, the gcode, and the .scpost.
It looks correct, but since I don't have a MASSO controller I've not run it.
Use a pipe wall thickness of 0mm when you do rotary setup, and set the pipe diameter to the outside diameter dimension.
Apparently SC sets the zero degree point on the cylinder at the midpoint of the flattened shape in the sketch window.
Zero Z to the cylinder wall, as you would expect.
Let me know how it goes.
MASSO Plasma DTHC w Rotary
MASSO Plasma DTHC w Rotary
- Attachments
-
- sc rotary test.nc.txt
- (1.44 KiB) Downloaded 762 times
-
- MASSO Plasma DTHC w Rotary LDC.scpost
- (7.44 KiB) Downloaded 775 times
-
- sc rotary test.job
- (14.52 KiB) Downloaded 817 times
MillRight CNC MegaV XL XYZA Tri-CAM Mill/Plasma/Laser
grbl 1.1i, UGS, Win 11, LightBurn, SC, Aspire, and sometimes [con]Fusion360
my youtube channel
grbl 1.1i, UGS, Win 11, LightBurn, SC, Aspire, and sometimes [con]Fusion360
my youtube channel