Having problems with or questions about SheetCam? Post them here.
ArchieF
Posts: 69 Joined: Sun Jan 06, 2008 1:54 pm
Post
by ArchieF » Sat Feb 22, 2014 6:33 pm
I see 3 layers :
Layer 0
Layer fase
Layer rastscheibe
Are this all ?
Edit: CAD program shows M3 and M5 thread but not SheetCAM
Richard
ArchieF
Posts: 69 Joined: Sun Jan 06, 2008 1:54 pm
Post
by ArchieF » Sat Feb 22, 2014 6:52 pm
In the Drawing Options Dialog check the option ' use points for drilling '.
Then the missing layers appear.
Richard
christian99x
Posts: 29 Joined: Fri Jan 25, 2013 12:47 pm
Post
by christian99x » Sun Feb 23, 2014 1:34 pm
you don't see a layer "aussen" or "kontur"? neither in sheetcam nor in your cad software?
ArchieF
Posts: 69 Joined: Sun Jan 06, 2008 1:54 pm
Post
by ArchieF » Sun Feb 23, 2014 3:02 pm
I can see both layers in the layer list of the CAD but trying to show them fails so as if they would be empty.
All other layers I can activate or deactivate
Rich
christian99x
Posts: 29 Joined: Fri Jan 25, 2013 12:47 pm
Post
by christian99x » Sun Feb 23, 2014 6:37 pm
I have this issue again and again. On another computer the import works without problems.
I am also missing the metric/imperial option in the scaling of the drawing import dialog - I think it is a problem of the dxf import plugin....? Am I missing any libraries....? PLEASE HELP....
Thanks
C.
ArchieF
Posts: 69 Joined: Sun Jan 06, 2008 1:54 pm
Post
by ArchieF » Mon Feb 24, 2014 4:13 pm
Do you have the correct extension *.dxf selected in the file open dialog ?
Do you have unchecked from the menu :
Options -> Application Options -> Annoying dialogs : Import Drawing ?
Richard
christian99x
Posts: 29 Joined: Fri Jan 25, 2013 12:47 pm
Post
by christian99x » Mon Feb 24, 2014 5:14 pm
Do you have the correct extension *.dxf selected in the file open dialog ?
This did the trick - great! Thanks a lot!
C.