sheetcam.com

Hello

How can I cut a D or an 8 in plasma cutting. I would like to insert bridges so that the middle piece does not fall out. My programs are Sheetcam and Cut2D.

Hello
thanks works

double post

Hi I still have the following problem with the post processor Mach3 plasma.spost. I have an M3 macro that runs G31 automatically. I imagine Mach 3 going to the X and Y axes and then doing M3. At the moment it is the case that Mach 3 first moves to Z20 (rapid traverse height) then first to X and Y an...

Hi got it going M10 and M11 works at pokeys57cnc I use it to toggle THC on and off now. I already had the one with the C axis and C0 inside. But it also works without. I switch the output pin 45 with M10/M11. I connected pin 45 to pin 43 on the pokeys. Thus, when switching M10 / M11, I have a win si...

Hi


Found the bug.
It was probably the THC controller (interference).
Now everything works as it should.
Also, I've got M10 and M11 working now made to run
(pokeys57cnc Mach3 and Plasmasens)

But I can't judge whether the M10 and M11 are really faster under my configuration

Hallo

Nach dem Makro M102 bleibt die Anlage die meiste Zeit
stehen und rührt sich dann nicht mehr.

Wenn ich das Programm ohne THC (ohne M101 und M102)
laufen lasse funktioniert es ohne Probleme.

Hallo Ich kann leider kein Englich. Habe das Problem das mir Mach3 fast immer stehen bleibt wenn THC beim Programmdurchlauf automatisch ausgeschaltet wird. (einschalten funktioniert immer) Egal ob bei Kreisen beim Anfahren beim wegfahren usw. Zum Beispiel: N0370 M102; Thc off (Beim Anfahren) N0380 G...