sheetcam.com

this is right. it´s the same.

Unfortunately my machine can't do it.

But I still have another question: how to set the initial piercing height.

Torch to work distance is 3mm - how can I set the piercing height 6mm?

1) use a 3mm OverCut in the Jet Operation. How i can find it in sheetcam? 2) No Leadout. ok 3) make a Path Rule Before End 6mm to run code snippet to ramp down amps. (I assume you know the gcodes to use and that your controller consumes it while maintaining continuous motion.) This is the problem, I...

I have a plasma cnc and make the gcode with sheetcam. but i can find the right setting. I cut a hole: 1. Lead in 2. Cutting speed 60% 3. ?? 3mm for end shout be begins current Ramp down (See Picture 1) 4. ?? 3mm current shuts off while maintaining full speed 100% torch motion (see picture 2). .........

Hello, I would like to see the functions of "Path Rules" in my G-Code. What do I have to change in sheetcam to see the information in the G-Code. example: i have set in sheetcam "path rules" small circle ........ but i can not see in the g-code. % G71 G91 G40 G92X0Y0 (Part: KONST...

Hallo,
hat jemand eine Alte Version V6 in Deutsch?
does anyone have an old version V6 in German?

I would like a Z-Ref (floating heat) my machine has such a limit switch. but how to add it in the post processor?

i have found a postprocessor.
but i´m not soure is this the right.

in the annex find you

- data of my machine
- and the postprocessor what i mean this is right

Hello i need a post processor expert. i have a post processor. Starfire.spost but without offset function i have a other post processor with offset offset.scpost can we copy the only the offset function in form offset.scpost to Starfire.spost addition control in the Starfire.spost the M.. on the pic...

Hello, i have buy a cnc plasma cutter of china. - for create the g-code was inside Starcam. Starcam is not good. i will create my g-code with sheetcam. Controller is; Starfire-Sharpon CC-S3C with THC Controller SF-HC25K I need the right post Processor - For me ist important. offset and for each cut ...