Linux is a nightmare to support. Every new release breaks something.
Theer is a package called Wine that allows you to run Windows executables on Linux. You may have a better experience using the Windows version with Wine.
Search found 3663 matches
- Thu May 09, 2024 10:31 am
- Forum: Problems and questions
- Topic: Issue with error messages on Linux
- Replies: 1
- Views: 56
- Wed May 08, 2024 9:53 am
- Forum: Problems and questions
- Topic: Drag Knife Pluggin
- Replies: 2
- Views: 92
Re: Drag Knife Pluggin
I see a number of issues. None of the plasma posts are set up for drag knife. You need to use a milling/routing post. The 'Offset amount' in your cut operation is to adjust the overall size of your part. Normally I'd recommend setting it to 0 unless you are doing something like inlay work where you ...
- Tue May 07, 2024 11:59 am
- Forum: Problems and questions
- Topic: Evaluation Limit Reached
- Replies: 10
- Views: 44770
Re: Evaluation Limit Reached
I have sent you an email.
- Sun May 05, 2024 9:50 am
- Forum: Problems and questions
- Topic: Dialog check boxes not showing up
- Replies: 2
- Views: 77
Re: Dialog check boxes not showing up
Is this on Linux?If so take a look at this thread. It may help. https://forum.sheetcam.com/viewtopic.php?t=7709
- Fri May 03, 2024 1:41 pm
- Forum: Problems and questions
- Topic: Rules not working as expected
- Replies: 8
- Views: 156
Re: Rules not working as expected
1. Arc has diameter 20mm, so 40% feedrate should be applied, but it is 70% (the second half of hole has correct 40% feedrate) Hmm, that's an odd one. It does look like something strange is going on in SheetCam. It is triggering the 40% override then the 70% override, which is the wrong way around. ...
- Thu May 02, 2024 2:08 pm
- Forum: Problems and questions
- Topic: Developing Post Processors Mits 3015LVP & old Trumpf/Bosch
- Replies: 5
- Views: 217
Re: Developing Post Processors Mits 3015LVP & old Trumpf/Bosch
What extra parameters do you need to add by hand? It is possible to add extra parameters to your tool definitions if needed. Take a look at the post.DefineCustomToolParam documentation.
- Tue Apr 30, 2024 9:29 am
- Forum: Problems and questions
- Topic: licencia sheetcam
- Replies: 4
- Views: 595
Re: licencia sheetcam
Just like the previous poster you left a message. I am in the UK so the message arrived during the night my time. You should have received your license by now.
- Thu Apr 25, 2024 5:24 pm
- Forum: Problems and questions
- Topic: Developing Post Processors Mits 3015LVP & old Trumpf/Bosch
- Replies: 5
- Views: 217
Re: Developing Post Processors Mits 3015LVP & old Trumpf/Bosch
Trying to figure out cutter comp - with all the various machines, materials, and parameters in the shop, it works best for us to fight offset at the machine. Les got me started with OnOffsetRight(/Left/None). Just basically turning it on is already getting workable code for the Mits lasers - they j...
- Wed Apr 24, 2024 4:13 pm
- Forum: Problems and questions
- Topic: G0/G1 moves
- Replies: 1
- Views: 185
Re: G0/G1 moves
G0 is a command to move as fast as possible. As such there isn't any way to specify a feed rate. Some controllers do have a separate control that allows you to slow down the G0 speed but this isn't something the g-code has any control over.
- Wed Apr 24, 2024 2:11 pm
- Forum: Contributed plugins, tools and posts
- Topic: Job Costing Plugin
- Replies: 16
- Views: 37779
Re: Job Costing Plugin
I just did some experiments with this plugin and it appears to be quite broken at the moment. I will have a go at fixing it but this may take a while.
- Mon Apr 15, 2024 6:52 pm
- Forum: Contributed plugins, tools and posts
- Topic: German Translation
- Replies: 36
- Views: 122380
Re: German Translation
The Linux release tends to lag behind the Windows releases so 7.1.35 isn't available. I need to do an update soon.
- Tue Apr 09, 2024 3:17 pm
- Forum: Problems and questions
- Topic: "No Tools Available"....?
- Replies: 4
- Views: 376
Re: "No Tools Available"....?
If you want to cut with a drag knife you need to first create a drag knife tool. The tool syou have defined are plasma tools, which cannot be used by the drag knife operation. The image you showed was of a milling/routing operation. Again if you are milling/routing you need to define a rotary tool. ...
- Tue Apr 09, 2024 6:50 am
- Forum: Problems and questions
- Topic: "No Tools Available"....?
- Replies: 4
- Views: 376
Re: "No Tools Available"....?
You have SheetCam configured for both milling/routing and plasma cutting. It is showing 'no tools available' because you are trying to do a milling/routing operation but have no milling tools defined. You need to use a jet cutting operation for plasma. Are you just plasma cutting? If so go to Option...
- Mon Apr 01, 2024 7:32 am
- Forum: Problems and questions
- Topic: Need some help with settings
- Replies: 11
- Views: 861
Re: Need some help with settings
Looks like someone manually added lead ins. They tend to confuse SheetCam.
- Thu Mar 28, 2024 2:49 pm
- Forum: Problems and questions
- Topic: modifying post processor for drilling
- Replies: 2
- Views: 1120
Re: modifying post processor for drilling
Are you using the 'PremierPlasma CNC floating head' post? I had a quick look at the post and if you just want to get rid of the referencing code when marking it's pretty easy to change. Edit the post and look for function OnPenDown() which should be near the middle of the file. The first two lines o...