sheetcam.com

I'm wondering how I can create a post for my machine that would work with my plasma table. I'm pretty new to CNC, being only 17, so I appreciate your help. What CNC controller does your machine use? I'm not exactly sure if I understand what you mean by the offset amount. I thought it was the measur...

Linux is a nightmare to support. Every new release breaks something.
Theer is a package called Wine that allows you to run Windows executables on Linux. You may have a better experience using the Windows version with Wine.

I see a number of issues. None of the plasma posts are set up for drag knife. You need to use a milling/routing post. The 'Offset amount' in your cut operation is to adjust the overall size of your part. Normally I'd recommend setting it to 0 unless you are doing something like inlay work where you ...

I have sent you an email.

Is this on Linux?If so take a look at this thread. It may help. https://forum.sheetcam.com/viewtopic.php?t=7709

1. Arc has diameter 20mm, so 40% feedrate should be applied, but it is 70% (the second half of hole has correct 40% feedrate) Hmm, that's an odd one. It does look like something strange is going on in SheetCam. It is triggering the 40% override then the 70% override, which is the wrong way around. ...

What extra parameters do you need to add by hand? It is possible to add extra parameters to your tool definitions if needed. Take a look at the post.DefineCustomToolParam documentation.

Just like the previous poster you left a message. I am in the UK so the message arrived during the night my time. You should have received your license by now.

Trying to figure out cutter comp - with all the various machines, materials, and parameters in the shop, it works best for us to fight offset at the machine. Les got me started with OnOffsetRight(/Left/None). Just basically turning it on is already getting workable code for the Mits lasers - they j...

G0 is a command to move as fast as possible. As such there isn't any way to specify a feed rate. Some controllers do have a separate control that allows you to slow down the G0 speed but this isn't something the g-code has any control over.

I just did some experiments with this plugin and it appears to be quite broken at the moment. I will have a go at fixing it but this may take a while.

The Linux release tends to lag behind the Windows releases so 7.1.35 isn't available. I need to do an update soon.

If you want to cut with a drag knife you need to first create a drag knife tool. The tool syou have defined are plasma tools, which cannot be used by the drag knife operation. The image you showed was of a milling/routing operation. Again if you are milling/routing you need to define a rotary tool. ...

You have SheetCam configured for both milling/routing and plasma cutting. It is showing 'no tools available' because you are trying to do a milling/routing operation but have no milling tools defined. You need to use a jet cutting operation for plasma. Are you just plasma cutting? If so go to Option...

Looks like someone manually added lead ins. They tend to confuse SheetCam.