Hello everybody,
I´ve just finished my setup and try cutting machine with Mach 3+ TNG with rotary plasma plugin.
I have set in POST one revolution is 360... i know, it takes as linear axes... but i have set mototors to 360 is one revolution... So coordinates are OK, bud problem is cutting speed, do you have same ideas how to set speeed for axis A.... because i have ery good linear speed which works... But problem is in diameter in axis A... How I can drive this parameter? because Speed on diameter is depend on diameter... I have to chanfe every time set for axis A in Mach or i can edit post for this?
RoratyPlasma - Feedrate
- Les Newell
- Site Admin
- Posts: 3677
- Joined: Thu May 11, 2006 8:12 pm
Re: RoratyPlasma - Feedrate
Sorry, I missed this question. The post takes care of cutting speed and diameter compensation.
In my experience, Mach3's path planner works better if the rotary axis is set to 1 unit per revolution rather than 360. If you change this in Mach you also need to change it in the post.
In my experience, Mach3's path planner works better if the rotary axis is set to 1 unit per revolution rather than 360. If you change this in Mach you also need to change it in the post.