Hi
I am trying to run a simulation of a tube cutting job but the tool is alway on the back side of the material. I cannot seem to turn the job in any way to enable the show of the tool.
Any suggestions?
Search found 34 matches
- Wed Oct 25, 2023 1:58 pm
- Forum: Problems and questions
- Topic: Rotary simulation tool position
- Replies: 1
- Views: 7181
- Fri Oct 07, 2022 2:31 pm
- Forum: Problems and questions
- Topic: Plasma tool wizard ignores tool name
- Replies: 3
- Views: 644
Re: Plasma tool wizard ignores tool name
Thanks Les
- Thu Oct 06, 2022 4:31 pm
- Forum: Problems and questions
- Topic: Plasma tool wizard ignores tool name
- Replies: 3
- Views: 644
Plasma tool wizard ignores tool name
I am tryin to create a new plasma tool with the wizard that is on the top ribbon. It creates the tool but ignores the name that is selected in the dialog. The standard name "Plasma, 1.5 mm kerf" is always used.
Am I doing something wrong?
Am I doing something wrong?
- Tue Sep 14, 2021 9:04 am
- Forum: Problems and questions
- Topic: DXF file import not correct
- Replies: 1
- Views: 1261
DXF file import not correct
I have a DXF file that when imported shows no information or layers. When I looked at the drawing file , I found that there is no information on layer 0 and 1 but the designer put the outline of the part on layer 2. The question is, must there be information on layer 0, and why does layer 2 informat...
- Mon Sep 13, 2021 5:21 pm
- Forum: Problems and questions
- Topic: Windows dll missing
- Replies: 3
- Views: 1506
Re: Windows dll missing
Hi Les
I did that first but it made no difference. I then uninstalled and did a new install. It asked if I wanted to reinstall the VC_redist. I then first removed the VC_redist and then installed via Sheetcam install again.
I did that first but it made no difference. I then uninstalled and did a new install. It asked if I wanted to reinstall the VC_redist. I then first removed the VC_redist and then installed via Sheetcam install again.
- Mon Sep 13, 2021 10:58 am
- Forum: Problems and questions
- Topic: Windows dll missing
- Replies: 3
- Views: 1506
Windows dll missing
I have a customer that is getting this error after using the package for some time already.
I uninstalled and did n reinstall but no change.
Anyone had this before?
I uninstalled and did n reinstall but no change.
Anyone had this before?
- Thu Feb 25, 2021 10:00 am
- Forum: Problems and questions
- Topic: Multiple machines setup
- Replies: 1
- Views: 808
Multiple machines setup
Hi, I am using Sheetcam to generate gcode for multiple machines. Not just for myself but for customers to give support while they are training. I used to just make a copy of the EXE and named it to the machine to match. It would seem that that is no longer possible and I assume the feature of saving...
- Thu Feb 25, 2021 9:54 am
- Forum: Problems and questions
- Topic: Scanything and Pokeys
- Replies: 2
- Views: 7004
Re: Scanything and Pokeys
Unfortunately I did not fix it as the two softwares are not compatible. The Scanything needs to talk to internal functions of Mach that are no longer available due to the Pokeys DLL shielding those for it's own control
- Sun May 12, 2019 8:56 am
- Forum: Problems and questions
- Topic: Scanything and Pokeys
- Replies: 2
- Views: 7004
Scanything and Pokeys
Hi I am using Scanything with Mach3 and PokeysCnc57. I am having problems when trying to jog in the X axis. It would seem that I can only travel in one direction and only the master(not slave) motor is turning. All movement on the X axis is always in one direction no matter the direction of the requ...
- Fri Jul 27, 2018 1:18 pm
- Forum: Problems and questions
- Topic: Moreposts plugin problem
- Replies: 8
- Views: 2187
Re: Moreposts plugin problem
Ah ok that makes sense. Thanks.
- Fri Jul 27, 2018 7:37 am
- Forum: Problems and questions
- Topic: Moreposts plugin problem
- Replies: 8
- Views: 2187
Re: Moreposts plugin problem
Thanks Les. Are the plugins not updated with a new release? If not, how do I make sure my plugin stuff is up to date? I have several and some at customers.
- Thu Jul 26, 2018 3:07 pm
- Forum: Problems and questions
- Topic: Moreposts plugin problem
- Replies: 8
- Views: 2187
Re: Moreposts plugin problem
The post I selected is a working post that I used on a customers machine. It works as the primary post. I tried several other posts.
I am on Windows 10 and the version is 6.0.26 (production)
I am on Windows 10 and the version is 6.0.26 (production)
- Thu Jul 26, 2018 2:36 pm
- Forum: Problems and questions
- Topic: Moreposts plugin problem
- Replies: 8
- Views: 2187
Re: Moreposts plugin problem
Hi Les
No entries at all. At least from the post process.
No entries at all. At least from the post process.
- Thu Jul 26, 2018 10:14 am
- Forum: Problems and questions
- Topic: Moreposts plugin problem
- Replies: 8
- Views: 2187
Moreposts plugin problem
Hi
I am trying to use the moreposts plugin but it will not execute any post except the first one. There is a message that flashes so fast that I cannot see what the problem is.
I did edit the macro to include the posts that I want but as I cannot see the error ....
Any ideas?
I am trying to use the moreposts plugin but it will not execute any post except the first one. There is a message that flashes so fast that I cannot see what the problem is.
I did edit the macro to include the posts that I want but as I cannot see the error ....
Any ideas?
- Sun Jun 17, 2018 9:22 am
- Forum: Problems and questions
- Topic: Finish allowance on spiral pocket over cut
- Replies: 4
- Views: 1579
Re: Finish allowance on spiral pocket over cut
I forgot to mention that it is the development release